Murtoli Ottoman

The Murtoli designed for the outdoors goes inside, which confirms the permeability of spaces: In gets out (cf Ottoman), and Out gets in (cf Murtoli). A broad 240 x 120 seat platform, made from fibreglass slats and ultra-flexible foam, mounted on a matt black aluminium base and covered in a water-repellent cover. The back cushions are all foam and weighted with a 15mm wooden plate (indoor) to provide a support surface for the non-slip material. The back cushions allow you to find the ideal position, by moving them on the platform. The large settee is offered with 2 back cushions and a bolster cushion. It can either be bi-colour and/or with 2 materials. The collection is completed with a 120 x 120 footstool which can allow the creation of a corner composition. STRUCTURE Structure of seat: mechanically-soldered frame. The invisible screws under the base are grey for the outdoor version and black for the indoor version. Structure of backrest cushion: ABS plate (outdoor) or panel of particleboard (indoor). The back cushions of the indoor and outdoor versions have the same weight. COMFORT Suspension via polypropylene slats reinforced with fibreglass. The seat is composed of high resilience polyurethane Bultex foam (38 kg/m3 – 3.6 kPa and 38 kg/m3 – 2.8 kPa). The back cushion is composed of high resilience polyurethane Bultex foam (42 kg/m3 – 4.8 kPa and 26 kg/m3 – 1.4 kPa) clad in ultra-flexible foam (45 kg/m3 – 1.8 kPa). Its interior is fitted with an anti-slip system. The bolster is made from high resilience polyurethane Bultex foam (26 kg/m3 – 1.4 kPa). COVER Covers quilted with 110 g/m² polyester. Baguette stitching and twin-needle stitching on seat and back cushions ; baguette stitching on bolster. Covers may be removed by a professional, except for a base in leather or microfibre.