Skip to main content
Return
Image Extending dining table 1
Image Extending dining table 2 Image Extending dining table 3

Tables

Allungami Extending dining table

8 Finishes

Image Extending dining table 1

Characteristics

Dining table with base in black or bronze lacquered steel. - Top in 9/10 Fenix laminate. - Top in 1/8'' - 3 mm thick white marble-effect Calacatta ceramic stoneware, bonded to a 1/2'' - 16 mm thick MDF panel. The extension is matched to the top and is continuous (with the marbled motif continuous across the top and extension). The Calacatta finish has the look of veined marble, with the veining in tones of soft green and grey against an off-white background. - Top in 1/8'' - 3 mm thick slate-effect ceramic stoneware with matching extension, bonded to a 1/2'' - 16 mm thick MDF panel. The slate finish is inspired by the celebrated ‘pierre de Savoie’, with its ‘roughened’ irregular surface like that obtained by a traditional stone-dressing chisel. The relief effect is perceptible to the touch and makes a play with the light. All of available finishes for each size of table are listed on the following pages.The top is one piece: just pull it on one side to unfold one or two extensions, concealed beneath the top. If extended with a single extension, the table extends by 29 1/2'' - 75 cm (table L 59'' - 150 cm with one extension) or even 19 1/4'' - 49 cm or 38 1/2'' - 98 cm (table L 78 3/4'' - 200 cm with two extensions).