Description

With the Riga armchair, Eric Jourdan seizes on an archetypal piece, the Voltaire armchair. However comfortable it may be, this traditional armchair has a rather stiff, static air. Eric Jourdan's challenge was to soften its lines and breathe life and dynamism into them.
By treating the exterior shell as a shroud, a living skin which envelops the seat and back cushions, Eric Jourdan delivers a rejuvenated, pared-down version with free, sensual lines.

Design by

Eric Jourdan

Eric Jourdan Ligne Roset
RIGA
ARMCHAIR WITH 4 LEGS LOW BACK COMPLETE ELEMENT
DIMENSIONS
  • H 34" x W 31" x D 39" x SH 19"
Weight
  • Including packaging
    48 kg
Price range
  • From $ 2,080.00

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of sofa and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 0Ÿ''x 0Ÿ''/22 x 22 mm in a matte black or brilliant-chromed finish.

COMFORT
Block sprung suspension on the seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the sofa and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Sofa and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of the seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Haraold, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 15 3/4'' x 15 3/4'' (40 cm x 40 cm) cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
RIGA
ARMCHAIR WITH 4 LEGS HIGH BACK
DIMENSIONS
  • H 40" x W 31" x D 39" x SH 19"
Weight
  • Including packaging
    50 kg
Price range
  • From $ 2,100.00

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of sofa and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 0Ÿ''x 0Ÿ''/22 x 22 mm in a matte black or brilliant-chromed finish.

COMFORT
Block sprung suspension on the seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the sofa and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Sofa and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of the seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Haraold, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 15 3/4'' x 15 3/4'' (40 cm x 40 cm) cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
RIGA
SETTEE WITH 4 LEGS LOW BACK COMPLETE ELEMENT
DIMENSIONS
  • H 34" x W 63" x D 39" x SH 19"
Weight
  • Including packaging
    70 kg
Price range
  • From $ 3,620.00

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of sofa and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 0Ÿ''x 0Ÿ''/22 x 22 mm in a matte black or brilliant-chromed finish.

COMFORT
Block sprung suspension on the seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the sofa and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Sofa and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of the seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Haraold, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 15 3/4'' x 15 3/4'' (40 cm x 40 cm) cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
RIGA
FOOTSTOOL WITH 4 LEGS
DIMENSIONS
  • x W 25" x D 25" x SH 18"
Weight
  • Including packaging
    15 kg
Price range
  • From $ 705.00

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of sofa and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 0Ÿ''x 0Ÿ''/22 x 22 mm in a matte black or brilliant-chromed finish.

COMFORT
Block sprung suspension on the seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the sofa and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Sofa and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of the seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Haraold, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 15 3/4'' x 15 3/4'' (40 cm x 40 cm) cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
RIGA
ARMCHAIR WITH BASE LOW BACK COMPLETE ELEMENT
DIMENSIONS
  • H 34" x W 31" x D 39" x SH 19"
Weight
  • Including packaging
    48 kg
Price range
  • From $ 2,170.00

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of sofa and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 0Ÿ''x 0Ÿ''/22 x 22 mm in a matte black or brilliant-chromed finish.

COMFORT
Block sprung suspension on the seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the sofa and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Sofa and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of the seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Haraold, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 15 3/4'' x 15 3/4'' (40 cm x 40 cm) cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
RIGA
ARMCHAIR WITH BASE HIGH BACK
DIMENSIONS
  • H 40" x W 31" x D 39" x SH 19"
Weight
  • Including packaging
    50 kg
Price range
  • From $ 2,190.00

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of sofa and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 0Ÿ''x 0Ÿ''/22 x 22 mm in a matte black or brilliant-chromed finish.

COMFORT
Block sprung suspension on the seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the sofa and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Sofa and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of the seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Haraold, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 15 3/4'' x 15 3/4'' (40 cm x 40 cm) cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
RIGA
SOFA WITH BASE LOW BACK COMPLETE ELEMENT
DIMENSIONS
  • H 34" x W 63" x D 39" x SH 19"
Weight
  • Including packaging
    70 kg
Price range
  • From $ 3,830.00

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of sofa and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 0Ÿ''x 0Ÿ''/22 x 22 mm in a matte black or brilliant-chromed finish.

COMFORT
Block sprung suspension on the seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the sofa and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Sofa and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of the seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Haraold, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 15 3/4'' x 15 3/4'' (40 cm x 40 cm) cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
RIGA
OTTOMAN WITH BASE
DIMENSIONS
  • x W 25" x D 25" x SH 18"
Weight
  • Including packaging
    15 kg
Price range
  • From $ 795.00

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of sofa and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 0Ÿ''x 0Ÿ''/22 x 22 mm in a matte black or brilliant-chromed finish.

COMFORT
Block sprung suspension on the seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the sofa and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Sofa and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of the seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Haraold, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 15 3/4'' x 15 3/4'' (40 cm x 40 cm) cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
RIGA
CUSHION 15 3/4" x 15 3/4" FEATHER INTERIOR
DIMENSIONS
  • H 16" x W 16"
Weight
  • Including packaging
    1 kg
Price range
  • From $ 115.00

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of sofa and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 0Ÿ''x 0Ÿ''/22 x 22 mm in a matte black or brilliant-chromed finish.

COMFORT
Block sprung suspension on the seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the sofa and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Sofa and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of the seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Haraold, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 15 3/4'' x 15 3/4'' (40 cm x 40 cm) cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
Chargement en cours

Subscription to the newsletter

Catalog Request

Receive the catalogue
Ligne Roset 2018
at home

Ligne Roset demande catalog