Do not disturb Bed settee with 2 arms bedding 135 (w 135 x l 190 x h 14)

Do not disturb is a compact bed-settee, the primary objective of which is to optimize both the usage and the quality of the sleep area, whilst providing visual pleasure and the comfort of a 'real' settee. The patented mechanism and sprung mattress offer a very high quality sleep area. For optimum comfort, both opening and closing are electrically controlled at the touch of a button. Do not disturb's lines are sober and elegant. The continuous line of its structure offers broad armrests at just the right height for resting the arms. Aesthetics and comfort unite to make one forget that this settee, with its successful proportions, conceals within itself an ultra-efficient manually or electrically-operated mechanism for excellent everyday comfort. CONSTRUCTION Panels of tri plywood clad in polyether foam 60 kg/m3 - 7.8 kPa and polyester quilting 110 g/m². Delivered in 2 separate packs (3 in the case of the version with electric mechanism). COMFORT Suspension of seat via criss-cross webbing on the sleep platform and mattress. Sheet elastic suspension on back. Seat cushion in high resilience polyurethane Bultex foam 38 kg/m3 - 3.6 kPa and 30 kg/m3 - 1.8 kPa. Back cushions in Bultex foam 30 kg/m3 - 1.8 kPa, with integral lumbar in Bultex foam 38 kg/m3 - 3.6 kPa with compartmented comfort layer (3 horizontal compartments) filled with new goose feathers (10 % down/90 % feathers). The seat and back cushions remain fixed to the mechanism and fold beneath the sleep platform when opened out for use as a bed. Two options for the mechanism: manual, with easy, effortless opening and closing, or fully-automated electric (with ON/OFF button - simply press to fully open - and UP/DOWN buttons - press and hold to open or close). Lampolet patented assisted mechanism with lacquered steel frame, sleep platform made from thermo-soldered non-deforming steel mesh with spring-mounted reinforced criss-cross webbing at the foot. Mattress holders at head and foot. Pocket springs made with 1,8 mm. gauge steel wire ; sides in CM27 kg/m3 foam. Cover : FR treated 80% CO - 20 % PL terry cloth quilted with CM kg/m3 foam 8 mm. h and 100% PL fibre 200 g/m2 and non woven. Side : 100% ecru cotton FR treated fabric quilted with 5 mm. foam. MAKING-UP Covers of back and seat cushions padded with polyester quilting 200 g/m². The lines of this model are enhanced with single needle and baguette stitching. Removable covers. COVERING MATERIALS A monocolour model. Any covering material in the collection may be used (NB except technical impossibilities).