Description

With the Riga armchair, Eric Jourdan seizes on an archetypal piece, the Voltaire armchair. However comfortable it may be, this traditional armchair generally has a rather stiff, static air. Eric Jourdan's challenge was to soften its lines and breathe life and dynamism into them.
By treating the exterior shell as a shroud, a living skin which envelops the seat and back cushions, Eric Jourdan delivers a rejuvenated, pared-down version with free, sensual lines.

Design by

Eric Jourdan

Eric Jourdan Ligne Roset
RIGA
ARMCHAIR WITH 4 LEGS LOW BACK COMPLETE ITEM
DIMENSIONS
  • H 860 mm x W 790 mm x D 990 mm x SH 470 mm
Weight
  • Including packaging
    48 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black or brilliant-chromed finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
ARMCHAIR WITH 4 LEGS HIGH BACK
DIMENSIONS
  • H 1010 mm x W 790 mm x D 990 mm x SH 470 mm
Weight
  • Including packaging
    50 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black or brilliant-chromed finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
SETTEE WITH 4 LEGS LOW BACK COMPLETE ITEM
DIMENSIONS
  • H 860 mm x W 1600 mm x D 990 mm x SH 470 mm
Weight
  • Including packaging
    70 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black or brilliant-chromed finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
FOOTSTOOL WITH 4 LEGS
DIMENSIONS
  • x W 620 mm x D 620 mm x SH 460 mm
Weight
  • Including packaging
    15 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black or brilliant-chromed finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
ARMCHAIR WITH BASE LOW BACK COMPLETE ITEM
DIMENSIONS
  • H 860 mm x W 790 mm x D 990 mm x SH 470 mm
Weight
  • Including packaging
    48 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black or brilliant-chromed finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
ARMCHAIR WITH BASE HIGH BACK
DIMENSIONS
  • H 1010 mm x W 790 mm x D 990 mm x SH 470 mm
Weight
  • Including packaging
    50 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black or brilliant-chromed finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
SETTEE WITH BASE LOW BACK COMPLETE ITEM
DIMENSIONS
  • H 860 mm x W 1600 mm x D 990 mm x SH 470 mm
Weight
  • Including packaging
    70 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black or brilliant-chromed finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
FOOTSTOOL WITH BASE
DIMENSIONS
  • x W 620 mm x D 620 mm x SH 460 mm
Weight
  • Including packaging
    15 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black or brilliant-chromed finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
CUSHION 40 x 40 FEATHER INTERIOR
DIMENSIONS
  • H 400 mm x W 400 mm
Weight
  • Including packaging
    1 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black or brilliant-chromed finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Masaï, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

Subscription to the newsletter

Catalogue Request

Learn more about data management and protection

Learn more about data management and protection

Learn more about data management and protection

Offre exclusive

Learn more about data management and protection

Receive the catalogue
Ligne Roset 2019
at home

Ligne Roset demande catalog