Description

With the Riga armchair, Eric Jourdan seizes on an archetypal piece, the Voltaire armchair. However comfortable it may be, this traditional armchair generally has a rather stiff, static air. Eric Jourdan's challenge was to soften its lines and breathe life and dynamism into them.
By treating the exterior shell as a shroud, a living skin which envelops the seat and back cushions, Eric Jourdan delivers a rejuvenated, pared-down version with free, sensual lines.

Design by

Eric Jourdan

Eric Jourdan Ligne Roset
RIGA
ARMCHAIR WITH 4 LEGS LOW BACK COMPLETE ITEM
DIMENSIONS
  • H 860 mm x W 790 mm x D 990 mm x SH 470 mm
Weight
  • Including packaging
    48 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
ARMCHAIR WITH 4 LEGS HIGH BACK
DIMENSIONS
  • H 1010 mm x W 790 mm x D 990 mm x SH 470 mm
Weight
  • Including packaging
    50 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
SETTEE WITH 4 LEGS LOW BACK COMPLETE ITEM
DIMENSIONS
  • H 860 mm x W 1600 mm x D 990 mm x SH 470 mm
Weight
  • Including packaging
    72 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
FOOTSTOOL WITH 4 LEGS
DIMENSIONS
  • x W 620 mm x D 620 mm x SH 460 mm
Weight
  • Including packaging
    15 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
ARMCHAIR WITH BASE LOW BACK COMPLETE ITEM
DIMENSIONS
  • H 860 mm x W 790 mm x D 990 mm x SH 470 mm
Weight
  • Including packaging
    40 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
ARMCHAIR WITH BASE HIGH BACK
DIMENSIONS
  • H 1010 mm x W 790 mm x D 990 mm x SH 470 mm
Weight
  • Including packaging
    40 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
SETTEE WITH BASE LOW BACK COMPLETE ITEM
DIMENSIONS
  • H 860 mm x W 1600 mm x D 990 mm x SH 470 mm
Weight
  • Including packaging
    72 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
FOOTSTOOL WITH BASE
DIMENSIONS
  • x W 620 mm x D 620 mm x SH 460 mm
Weight
  • Including packaging
    15 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

RIGA
CUSHION 40 x 40 FEATHER INTERIOR
DIMENSIONS
  • H 400 mm x W 400 mm
Weight
  • Including packaging
    1 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.

COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.

MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.

COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.

Subscription to the newsletter

Catalogue Request

Learn more about data management and protection

Learn more about data management and protection

Offre exclusive

Learn more about data management and protection

At Ligne Roset we believe in providing you with as much choice as possible for each model so that you can make each purchase a completely personal and individual one. For example, with the Feng range there are 18 different options for the sofa itself (including choice of feet) 38 fabric choices which range in price from grade E to grade X and on average forty different colour options. It is unlikely there will ever be two people with exactly the same sofa! For expert help and advise on all options available to you, you will need to speak to your local retailer who also be able to provide you with comprehensive information regarding pricing.
Ligne Roset is committed to respecting your privacy. We use the information we collect about you to process orders and to provide a more personalized shopping experience. We will not sell or disclose any information that identifies you to a third party if requested. In addition, when you place an order with Ligne Roset your personal information and credit card information are secured.

Please inspect your purchase immediately upon delivery. If an item is damaged or unsatisfactory our local retailer in charge of your order will work with you to resolve the issue to your satisfaction with expert product repair, parts replacement or an exchange. You may also contact us via e-mail at admin@ligne-roset.co.uk. If you receive a damaged, defective or incorrect item, we will work with you to make things right.

Quick ship products:
A non-refundable fee of 20% applies to returns, cancellations or changes on quick ship products. Full refunds are only given if the order is cancelled within 48 hours of the order being placed.

White Glove Delivery Service charges are not refundable.

Returns are accepted only at the warehouse of your local retailer. No returns will be accepted at the store location itself. To make a return, complete the return form here and attach images of your piece, prepay the postage, and insure each package and ship to the address your local retailer will communicate to you or you can email us at admin@ligne-roset.co.uk.

Made to Order Products:
We do not accept any returns or exchanges on made to order furniture, this includes products not included in quick ship and/or custom (your choice of finish and fabric) products.

Cancellation of an order can only be done within 48 hours of the order being placed. If you wish to cancel an order, please fill out a Cancellation form and e-mail to admin@ligne-roset.co.uk.

This return policy is only valid for items purchased on the official Ligne Roset e-commerce website for the UK market.

Please be aware that furniture is susceptible to damage during transit. We take great care to pack shipments so that they will arrive safely, so be sure to retain the original packing materials, original receipt and all merchandise tags for any item that you wish to return to us. You may have to provide supplementary packing materials if the outer carton has been worn during the original trip out to you.

Delayed Delivery Service:
If there is a specific time period when you may not be able to accept delivery, please contact your local distributor. Items stored for more than 30 days will be subject to a 10% retail fee for monthly storage.
We stand behind the quality of everything we sell. Your satisfaction with our products is of the utmost importance to us. We make every effort to select and sell products constructed of premium materials built by highly skilled people to exacting standards.

If there is a problem with your order, contact your local Ligne Roset showroom or our Customer Service team at admin@ligne-roset.co.uk within three (3) days of receipt. If you receive a damaged, defective or incorrect item, we will work with you to make things right.

If you wish to return an item, your refund will be reduced by a restocking charge equal to 10% of the purchase price and you will be responsible for outbound and return shipping and delivery charges. Returns must be received in original condition within 30 days. Credit card orders will receive refunds in the form of a credit back to the original account. Check and cash payments will be returned via a refund check or Ligne Roset Merchandise Credit.

White Glove Delivery Service charges are not refundable. We do not accept any returns or exchanges on custom or special order furniture. This return policy is only valid for items purchased on the official Ligne Roset website.

If you have any questions, please contact us at admin@ligne-roset.co.uk.

Ligne Roset is committed to respecting your privacy. We use the information we collect about you to process orders and to provide a more personalized shopping experience. We will not sell or disclose any information that identifies you to a third party if requested. In addition, when you place an order with Ligne Roset your personal information and credit card information are secured.

Please inspect your purchase immediately upon delivery. If an item is damaged or unsatisfactory our local retailer in charge of your order will work with you to resolve the issue to your satisfaction with expert product repair, parts replacement or an exchange. You may also contact us via e-mail at admin@ligne-roset.co.uk. If you receive a damaged, defective or incorrect item, we will work with you to make things right.

Quick ship products:
A non-refundable fee of 20% applies to returns, cancellations or changes on quick ship products. Full refunds are only given if the order is cancelled within 48 hours of the order being placed.

White Glove Delivery Service charges are not refundable.

Returns are accepted only at the warehouse of your local retailer. No returns will be accepted at the store location itself. To make a return, complete the return form and attach images of your piece, prepay the postage, and insure each package and ship to the address your local retailer will communicate to you or you can email us at admin@ligne-roset.co.uk.

Made to Order Products:
We do not accept any returns or exchanges on made to order furniture, this includes products not included in quick ship and/or custom (your choice of finish and fabric) products.

Cancellation of an order can only be done within 48 hours of the order being placed. If you wish to cancel an order, please fill out a Cancellation form and e-mail to admin@ligne-roset.co.uk.

This return policy is only valid for items purchased on the official Ligne Roset e-commerce website for the UK market.

Please be aware that furniture is susceptible to damage during transit. We take great care to pack shipments so that they will arrive safely, so be sure to retain the original packing materials, original receipt and all merchandise tags for any item that you wish to return to us. You may have to provide supplementary packing materials if the outer carton has been worn during the original trip out to you.
 
Delayed Delivery Service:
If there is a specific time period when you may not be able to accept delivery, please contact your local distributor. Items stored for more than 30 days will be subject to a 10% retail fee for monthly storage.
At Ligne Roset we believe in providing you with as much choice as possible for each model so that you can make each purchase a completely personal and individual one. For example, with the Feng range there are 18 different options for the sofa itself (including choice of feet) 38 fabric choices which range in price from grade E to grade X and on average forty different colour options. It is unlikely there will ever be two people with exactly the same sofa! For expert help and advise on all options available to you, you will need to speak to your local retailer who also be able to provide you with comprehensive information regarding pricing.