Description
In 2017, Moël celebrates its 10th birthday by complementing itself with Moël 2, which adopts a new covering material for the corolla of its back : a 5 mm thick wool felt in colour terra cotta. In addition, the seat and the interior of the backrest of Moël 2 are now available in 2 versions:
- the usual Moël bands of regular vertical quilting, or
- a special new style of quilting in tighter bands of quilting with interrupted stitching, creating a dynamic rhythmic effect.
Moël 2speaks directly to all those who live in a natural, casual style and whose wish is to create a warm, intimate living space in which to receive friends. Its very high degree of comfort is affirmed by its softly rounded lines which combine to create a convivial space - and which almost make one forget that it bears no resemblance to any other seat.
ARMCHAIR - ORIGINAL QUILTING LOW BACK EXTERIOR OF BACK IN FELT
- H 810 mm x W 1050 mm x D 890 mm x SH 410 mm
-
Including packaging
29 kg
Technical Specifications
CONSTRUCTION
Shells in thermoformed ABS (a combination of resin + elastomer which results in a highly resistant form of plastic) clad in polyether foam 34 kg/m3 - 5.7 kPa. Decorative rear feet covered to match rest of seat.
COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa clad in a comfort layer of Bultex foam 26 kg/m3 - 1.4 kPa. Seat cover quilted with Bultex 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest, lumbar cushion and armrests in Bultex 26 kg/m3 - 1.4 kPa clad in 200 g/m² polyester quilting. Footstool in Bultex 48 kg/m3 - 5.3 kPa.
MAKING-UP
Covers of back and seat are quilted with 300 g/m² polyester on their interior faces, creating a structured visual effect of quilted bands. Covers of footstool are quilted with 200 g/m² polyester.
The rear of each item is held within a corolla-shaped piece which is zipped into place (metal-fronted zip). This corolla may be covered in 5 mm thick wool felt.
COVERING MATERIALS
The covers of the inside faces are ordered separately from those of the external corolla, thus making it possible to create a bi-material and/or bicolour interpretation.
The footstool is also a bicolour piece : Inga Sempé advises using the same covering material for the top surface as that used for the corolla of the armchairs/settees, and the same covering material for the main part of the footstool as that used for the inside faces of the armchairs or settees.
SMALL SETTEE - ORIGINAL QUILTING LOW BACK EXTERIOR OF BACK IN FELT
- H 810 mm x W 1550 mm x D 890 mm x SH 410 mm
-
Including packaging
47 kg
Technical Specifications
CONSTRUCTION
Shells in thermoformed ABS (a combination of resin + elastomer which results in a highly resistant form of plastic) clad in polyether foam 34 kg/m3 - 5.7 kPa. Decorative rear feet covered to match rest of seat.
COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa clad in a comfort layer of Bultex foam 26 kg/m3 - 1.4 kPa. Seat cover quilted with Bultex 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest, lumbar cushion and armrests in Bultex 26 kg/m3 - 1.4 kPa clad in 200 g/m² polyester quilting. Footstool in Bultex 48 kg/m3 - 5.3 kPa.
MAKING-UP
Covers of back and seat are quilted with 300 g/m² polyester on their interior faces, creating a structured visual effect of quilted bands. Covers of footstool are quilted with 200 g/m² polyester.
The rear of each item is held within a corolla-shaped piece which is zipped into place (metal-fronted zip). This corolla may be covered in 5 mm thick wool felt.
COVERING MATERIALS
The covers of the inside faces are ordered separately from those of the external corolla, thus making it possible to create a bi-material and/or bicolour interpretation.
The footstool is also a bicolour piece : Inga Sempé advises using the same covering material for the top surface as that used for the corolla of the armchairs/settees, and the same covering material for the main part of the footstool as that used for the inside faces of the armchairs or settees.
LARGE SETTEE - ORIGINAL QUILTING LOW BACK EXTERIOR OF BACK IN FELT
- H 810 mm x W 2050 mm x D 890 mm x SH 410 mm
-
Including packaging
66 kg
Technical Specifications
CONSTRUCTION
Shells in thermoformed ABS (a combination of resin + elastomer which results in a highly resistant form of plastic) clad in polyether foam 34 kg/m3 - 5.7 kPa. Decorative rear feet covered to match rest of seat.
COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa clad in a comfort layer of Bultex foam 26 kg/m3 - 1.4 kPa. Seat cover quilted with Bultex 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest, lumbar cushion and armrests in Bultex 26 kg/m3 - 1.4 kPa clad in 200 g/m² polyester quilting. Footstool in Bultex 48 kg/m3 - 5.3 kPa.
MAKING-UP
Covers of back and seat are quilted with 300 g/m² polyester on their interior faces, creating a structured visual effect of quilted bands. Covers of footstool are quilted with 200 g/m² polyester.
The rear of each item is held within a corolla-shaped piece which is zipped into place (metal-fronted zip). This corolla may be covered in 5 mm thick wool felt.
COVERING MATERIALS
The covers of the inside faces are ordered separately from those of the external corolla, thus making it possible to create a bi-material and/or bicolour interpretation.
The footstool is also a bicolour piece : Inga Sempé advises using the same covering material for the top surface as that used for the corolla of the armchairs/settees, and the same covering material for the main part of the footstool as that used for the inside faces of the armchairs or settees.
ARMCHAIR - ORIGINAL QUILTING HIGH BACK EXTERIOR OF BACK IN FELT
- H 970 mm x W 1150 mm x D 980 mm x SH 410 mm
-
Including packaging
31 kg
Technical Specifications
CONSTRUCTION
Shells in thermoformed ABS (a combination of resin + elastomer which results in a highly resistant form of plastic) clad in polyether foam 34 kg/m3 - 5.7 kPa. Decorative rear feet covered to match rest of seat.
COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa clad in a comfort layer of Bultex foam 26 kg/m3 - 1.4 kPa. Seat cover quilted with Bultex 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest, lumbar cushion and armrests in Bultex 26 kg/m3 - 1.4 kPa clad in 200 g/m² polyester quilting. Footstool in Bultex 48 kg/m3 - 5.3 kPa.
MAKING-UP
Covers of back and seat are quilted with 300 g/m² polyester on their interior faces, creating a structured visual effect of quilted bands. Covers of footstool are quilted with 200 g/m² polyester.
The rear of each item is held within a corolla-shaped piece which is zipped into place (metal-fronted zip). This corolla may be covered in 5 mm thick wool felt.
COVERING MATERIALS
The covers of the inside faces are ordered separately from those of the external corolla, thus making it possible to create a bi-material and/or bicolour interpretation.
The footstool is also a bicolour piece : Inga Sempé advises using the same covering material for the top surface as that used for the corolla of the armchairs/settees, and the same covering material for the main part of the footstool as that used for the inside faces of the armchairs or settees.
ARMCHAIR - NEW QUILTING LOW BACK EXTERIOR OF BACK IN FELT
- H 810 mm x W 1050 mm x D 890 mm x SH 410 mm
-
Including packaging
29 kg
Technical Specifications
CONSTRUCTION
Shells in thermoformed ABS (a combination of resin + elastomer which results in a highly resistant form of plastic) clad in polyether foam 34 kg/m3 - 5.7 kPa. Decorative rear feet covered to match rest of seat.
COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa clad in a comfort layer of Bultex foam 26 kg/m3 - 1.4 kPa. Seat cover quilted with Bultex 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest, lumbar cushion and armrests in Bultex 26 kg/m3 - 1.4 kPa clad in 200 g/m² polyester quilting. Footstool in Bultex 48 kg/m3 - 5.3 kPa.
MAKING-UP
Covers of back and seat are quilted with 300 g/m² polyester on their interior faces, creating a structured visual effect of quilted bands. Covers of footstool are quilted with 200 g/m² polyester.
The rear of each item is held within a corolla-shaped piece which is zipped into place (metal-fronted zip). This corolla may be covered in 5 mm thick wool felt.
COVERING MATERIALS
The covers of the inside faces are ordered separately from those of the external corolla, thus making it possible to create a bi-material and/or bicolour interpretation.
The footstool is also a bicolour piece : Inga Sempé advises using the same covering material for the top surface as that used for the corolla of the armchairs/settees, and the same covering material for the main part of the footstool as that used for the inside faces of the armchairs or settees.
SMALL SETTEE - NEW QUILTING LOW BACK EXTERIOR OF BACK IN FELT
- H 810 mm x W 1550 mm x D 890 mm x SH 410 mm
-
Including packaging
47 kg
Technical Specifications
CONSTRUCTION
Shells in thermoformed ABS (a combination of resin + elastomer which results in a highly resistant form of plastic) clad in polyether foam 34 kg/m3 - 5.7 kPa. Decorative rear feet covered to match rest of seat.
COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa clad in a comfort layer of Bultex foam 26 kg/m3 - 1.4 kPa. Seat cover quilted with Bultex 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest, lumbar cushion and armrests in Bultex 26 kg/m3 - 1.4 kPa clad in 200 g/m² polyester quilting. Footstool in Bultex 48 kg/m3 - 5.3 kPa.
MAKING-UP
Covers of back and seat are quilted with 300 g/m² polyester on their interior faces, creating a structured visual effect of quilted bands. Covers of footstool are quilted with 200 g/m² polyester.
The rear of each item is held within a corolla-shaped piece which is zipped into place (metal-fronted zip). This corolla may be covered in 5 mm thick wool felt.
COVERING MATERIALS
The covers of the inside faces are ordered separately from those of the external corolla, thus making it possible to create a bi-material and/or bicolour interpretation.
The footstool is also a bicolour piece : Inga Sempé advises using the same covering material for the top surface as that used for the corolla of the armchairs/settees, and the same covering material for the main part of the footstool as that used for the inside faces of the armchairs or settees.
LARGE SETTEE - NEW QUILTING LOW BACK EXTERIOR OF BACK IN FELT
- H 810 mm x W 2050 mm x D 890 mm x SH 410 mm
-
Including packaging
66 kg
Technical Specifications
CONSTRUCTION
Shells in thermoformed ABS (a combination of resin + elastomer which results in a highly resistant form of plastic) clad in polyether foam 34 kg/m3 - 5.7 kPa. Decorative rear feet covered to match rest of seat.
COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa clad in a comfort layer of Bultex foam 26 kg/m3 - 1.4 kPa. Seat cover quilted with Bultex 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest, lumbar cushion and armrests in Bultex 26 kg/m3 - 1.4 kPa clad in 200 g/m² polyester quilting. Footstool in Bultex 48 kg/m3 - 5.3 kPa.
MAKING-UP
Covers of back and seat are quilted with 300 g/m² polyester on their interior faces, creating a structured visual effect of quilted bands. Covers of footstool are quilted with 200 g/m² polyester.
The rear of each item is held within a corolla-shaped piece which is zipped into place (metal-fronted zip). This corolla may be covered in 5 mm thick wool felt.
COVERING MATERIALS
The covers of the inside faces are ordered separately from those of the external corolla, thus making it possible to create a bi-material and/or bicolour interpretation.
The footstool is also a bicolour piece : Inga Sempé advises using the same covering material for the top surface as that used for the corolla of the armchairs/settees, and the same covering material for the main part of the footstool as that used for the inside faces of the armchairs or settees.
ARMCHAIR - NEW QUILTING HIGH BACK EXTERIOR OF BACK IN FELT
- H 970 mm x W 1150 mm x D 980 mm x SH 410 mm
-
Including packaging
31 kg
Technical Specifications
CONSTRUCTION
Shells in thermoformed ABS (a combination of resin + elastomer which results in a highly resistant form of plastic) clad in polyether foam 34 kg/m3 - 5.7 kPa. Decorative rear feet covered to match rest of seat.
COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa clad in a comfort layer of Bultex foam 26 kg/m3 - 1.4 kPa. Seat cover quilted with Bultex 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest, lumbar cushion and armrests in Bultex 26 kg/m3 - 1.4 kPa clad in 200 g/m² polyester quilting. Footstool in Bultex 48 kg/m3 - 5.3 kPa.
MAKING-UP
Covers of back and seat are quilted with 300 g/m² polyester on their interior faces, creating a structured visual effect of quilted bands. Covers of footstool are quilted with 200 g/m² polyester.
The rear of each item is held within a corolla-shaped piece which is zipped into place (metal-fronted zip). This corolla may be covered in 5 mm thick wool felt.
COVERING MATERIALS
The covers of the inside faces are ordered separately from those of the external corolla, thus making it possible to create a bi-material and/or bicolour interpretation.
The footstool is also a bicolour piece : Inga Sempé advises using the same covering material for the top surface as that used for the corolla of the armchairs/settees, and the same covering material for the main part of the footstool as that used for the inside faces of the armchairs or settees.
SMALL FOOTSTOOL - ORIGINAL QUILTING SIDES IN FELT
- x W 600 mm x D 460 mm x SH 370 mm
-
Including packaging
10 kg
Technical Specifications
CONSTRUCTION
Shells in thermoformed ABS (a combination of resin + elastomer which results in a highly resistant form of plastic) clad in polyether foam 34 kg/m3 - 5.7 kPa. Decorative rear feet covered to match rest of seat.
COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa clad in a comfort layer of Bultex foam 26 kg/m3 - 1.4 kPa. Seat cover quilted with Bultex 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest, lumbar cushion and armrests in Bultex 26 kg/m3 - 1.4 kPa clad in 200 g/m² polyester quilting. Footstool in Bultex 48 kg/m3 - 5.3 kPa.
MAKING-UP
Covers of back and seat are quilted with 300 g/m² polyester on their interior faces, creating a structured visual effect of quilted bands. Covers of footstool are quilted with 200 g/m² polyester.
The rear of each item is held within a corolla-shaped piece which is zipped into place (metal-fronted zip). This corolla may be covered in 5 mm thick wool felt.
COVERING MATERIALS
The covers of the inside faces are ordered separately from those of the external corolla, thus making it possible to create a bi-material and/or bicolour interpretation.
The footstool is also a bicolour piece : Inga Sempé advises using the same covering material for the top surface as that used for the corolla of the armchairs/settees, and the same covering material for the main part of the footstool as that used for the inside faces of the armchairs or settees.
SMALL FOOTSTOOL - NEW QUILTING SIDES IN FELT
- x W 600 mm x D 460 mm x SH 370 mm
-
Including packaging
10 kg
Technical Specifications
CONSTRUCTION
Shells in thermoformed ABS (a combination of resin + elastomer which results in a highly resistant form of plastic) clad in polyether foam 34 kg/m3 - 5.7 kPa. Decorative rear feet covered to match rest of seat.
COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa clad in a comfort layer of Bultex foam 26 kg/m3 - 1.4 kPa. Seat cover quilted with Bultex 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest, lumbar cushion and armrests in Bultex 26 kg/m3 - 1.4 kPa clad in 200 g/m² polyester quilting. Footstool in Bultex 48 kg/m3 - 5.3 kPa.
MAKING-UP
Covers of back and seat are quilted with 300 g/m² polyester on their interior faces, creating a structured visual effect of quilted bands. Covers of footstool are quilted with 200 g/m² polyester.
The rear of each item is held within a corolla-shaped piece which is zipped into place (metal-fronted zip). This corolla may be covered in 5 mm thick wool felt.
COVERING MATERIALS
The covers of the inside faces are ordered separately from those of the external corolla, thus making it possible to create a bi-material and/or bicolour interpretation.
The footstool is also a bicolour piece : Inga Sempé advises using the same covering material for the top surface as that used for the corolla of the armchairs/settees, and the same covering material for the main part of the footstool as that used for the inside faces of the armchairs or settees.
