Description

With the exception of its all-enveloping back, Moël draws heavily on Ligne Roset's longstanding expertise in the field of all-foam models. With its generous comfort underlined by its soft, rounded shape, Moël will appeal most to lovers of an informal, relaxed lifestyle, who want to welcome their friends in the most convivial way possible. Not forgetting, of course, that Moël does not look like any other seat in existence.

Design by

Inga Sempé

Inga Sempé Ligne Roset
MOEL
ARMCHAIR LOW BACK OUTSIDE BACK IN DIVINA
DIMENSIONS
  • H 810 mm x W 1050 mm x D 890 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
ARMCHAIR LOW BACK OUTSIDE BACK IN CODA
DIMENSIONS
  • H 810 mm x W 1050 mm x D 890 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
ARMCHAIR LOW BACK OUTSIDE BACK IN OREGON
DIMENSIONS
  • H 810 mm x W 1050 mm x D 890 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
ARMCHAIR LOW BACK OUTSIDE BACK IN KYOTO
DIMENSIONS
  • H 810 mm x W 1050 mm x D 890 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
SMALL SETTEE LOW BACK OUTSIDE BACK IN DIVINA
DIMENSIONS
  • H 810 mm x W 1550 mm x D 890 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
SMALL SETTEE LOW BACK OUTSIDE BACK IN CODA
DIMENSIONS
  • H 810 mm x W 1550 mm x D 890 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
SMALL SETTEE LOW BACK OUTSIDE BACK IN OREGON
DIMENSIONS
  • H 810 mm x W 1550 mm x D 890 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
SMALL SETTEE LOW BACK OUTSIDE BACK IN KYOTO
DIMENSIONS
  • H 810 mm x W 1550 mm x D 890 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
LARGE SETTEE LOW BACK OUTSIDE BACK IN DIVINA
DIMENSIONS
  • H 810 mm x W 2050 mm x D 890 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
LARGE SETTEE LOW BACK OUTSIDE BACK IN CODA
DIMENSIONS
  • H 810 mm x W 2050 mm x D 890 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
LARGE SETTEE LOW BACK OUTSIDE BACK IN OREGON
DIMENSIONS
  • H 810 mm x W 2050 mm x D 890 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
LARGE SETTEE LOW BACK OUTSIDE BACK IN KYOTO
DIMENSIONS
  • H 810 mm x W 2050 mm x D 890 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
ARMCHAIR HIGH BACK OUTSIDE BACK IN DIVINA
DIMENSIONS
  • H 970 mm x W 1150 mm x D 980 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
ARMCHAIR HIGH BACK OUTSIDE BACK IN CODA
DIMENSIONS
  • H 970 mm x W 1150 mm x D 980 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
ARMCHAIR HIGH BACK OUTSIDE BACK IN OREGON
DIMENSIONS
  • H 970 mm x W 1150 mm x D 980 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
ARMCHAIR HIGH BACK OUTSIDE BACK IN KYOTO
DIMENSIONS
  • H 970 mm x W 1150 mm x D 980 mm x SH 410 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
SMALL FOOTSTOOL SIDES IN DIVINA
DIMENSIONS
  • x W 600 mm x D 460 mm x SH 370 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
SMALL FOOTSTOOL SIDES IN CODA
DIMENSIONS
  • x W 600 mm x D 460 mm x SH 370 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
SMALL FOOTSTOOL SIDES IN OREGON
DIMENSIONS
  • x W 600 mm x D 460 mm x SH 370 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
SMALL FOOTSTOOL SIDES IN KYOTO
DIMENSIONS
  • x W 600 mm x D 460 mm x SH 370 mm

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.
MOEL
SMALL FOOTSTOOL MONOCOLOUR
DIMENSIONS
  • x W 600 mm x D 460 mm x SH 370 mm
Weight
  • Including packaging
    10 kg

Download product information sheet

Technical Specifications

CONSTRUCTION
Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame.

COMFORT
Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa.

MAKING-UP
Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable.

FABRICS
'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' covers of the armchair or settee.

Subscription to the newsletter

Catalogue Request

Learn more about data management and protection

Learn more about data management and protection

Learn more about data management and protection

Offre exclusive

Learn more about data management and protection

Receive the catalogue
Ligne Roset 2019
at home

Ligne Roset demande catalog