Description
With the Riga armchair, Eric Jourdan seizes on an archetypal piece, the Voltaire armchair. However comfortable it may be, this traditional armchair generally has a rather stiff, static air. Eric Jourdan's challenge was to soften its lines and breathe life and dynamism into them.
By treating the exterior shell as a shroud, a living skin which envelops the seat and back cushions, Eric Jourdan delivers a rejuvenated, pared-down version with free, sensual lines.
ARMCHAIR WITH 4 LEGS LOW BACK COMPLETE ITEM
- H 860 mm x W 790 mm x D 990 mm x SH 470 mm
-
Including packaging
48 kg
Technical Specifications
CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.
COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.
MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.
COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
ARMCHAIR WITH 4 LEGS HIGH BACK
- H 1010 mm x W 790 mm x D 990 mm x SH 470 mm
-
Including packaging
50 kg
Technical Specifications
CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.
COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.
MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.
COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
SETTEE WITH 4 LEGS LOW BACK COMPLETE ITEM
- H 860 mm x W 1600 mm x D 990 mm x SH 470 mm
-
Including packaging
72 kg
Technical Specifications
CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.
COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.
MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.
COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
FOOTSTOOL WITH 4 LEGS
- x W 620 mm x D 620 mm x SH 460 mm
-
Including packaging
15 kg
Technical Specifications
CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.
COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.
MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.
COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
ARMCHAIR WITH BASE LOW BACK COMPLETE ITEM
- H 860 mm x W 790 mm x D 990 mm x SH 470 mm
-
Including packaging
40 kg
Technical Specifications
CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.
COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.
MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.
COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
ARMCHAIR WITH BASE HIGH BACK
- H 1010 mm x W 790 mm x D 990 mm x SH 470 mm
-
Including packaging
40 kg
Technical Specifications
CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.
COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.
MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.
COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
SETTEE WITH BASE LOW BACK COMPLETE ITEM
- H 860 mm x W 1600 mm x D 990 mm x SH 470 mm
-
Including packaging
72 kg
Technical Specifications
CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.
COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.
MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.
COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
FOOTSTOOL WITH BASE
- x W 620 mm x D 620 mm x SH 460 mm
-
Including packaging
15 kg
Technical Specifications
CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.
COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.
MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.
COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
CUSHION 40 x 40 FEATHER INTERIOR
Technical Specifications
CONSTRUCTION
Structure of footstool and seats of settee and armchair in 3-layer particleboard. The back and armrests trace out a sweepingly curved shell, with a mechanically soldered steel structure clad in injected polyurethane foam 100 g/m² polyester quilting. Legs in square-section steel 22 x 22 mm in a matt black finish.
COMFORT
Block sprung suspension on seat. Integral seat cushion in high resilience Bultex foam (36 kg/m3 - 2.8 kPa / 38 kg/m3 - 3.,6 kPa / 60 kg/m3 - 7.5 kPa) with a compartmented comfort layer filled with new goose feathers (10 % down / 90 % feathers). Back cushion in Bultex foam (36 kg/m3 - 2.8 kPa / 26 kg/m3 - 1.4 kPa) clad in 110 g/m² polyester quilting. Footstool in a combination of 3 densities of Bultex foam as per the seats of the settees and armchair, clad in 110 g/m² polyester quilting.
MAKING-UP
Settee and armchair - horizontal stitching on the back cushion, held in place from top to bottom by 2 zips. 3 pinch finish on each side of seat cushion. Baguette stitch around the external seat shell.
Fabric version - the footstool has 2 mounting seams in 2 opposite corners.
Covers are removable.
COVERING MATERIALS
The low-backed armchair and low-backed settee may be made up in a bicolour version, in which case part A (seat and front of back) is only available in Canvas laine, Coda, Gandino, Galice, Harald, Match, Oxford, Rosae, Steelcut Trio or Terra, and part B (rear of back) is only available in Diva Diva, Kyoto or Orga leather. The 40 x 40 cushion is sold with a feather interior, is zipped, and may be made up in fabrics and leathers from the collection.
